What are three things you should not do while working in the lab?
10 Things NOT to Do in a Research Lab
- Wearing open-toed shoes.
- Keeping long hair down.
- Eating or drinking.
- Erasing data from your notebook.
- Showing up late.
- Forgetting to label samples or materials.
- Incorrectly disposing of your materials.
- Wearing shorts.
What are two important activities that you should do when you are finished with your lab work before you leave the lab?
Before leaving the lab, you’ll need to make sure it’s thoroughly cleaned so it’s ready and safe to work in again. Make sure to clean all used glassware, return reagents to the storage area, dispose waste in the right containers and clean your workbench.
What is laboratory safety training?
Laboratory Safety Training is required for any person who works in a laboratory to ensure that they are knowledgeable about the potential hazards of working in a laboratory setting and aware of the resources available to work safely at Princeton University.
How often does lab safety training need to be completed when working in a lab?
Refresher training for Fundamentals of Laboratory Safety will be provided at a minimum of every three (3) years. More frequent refresher training requirements will be at the discretion of individual campuses. All required safety training shall be completed and documented for each affected worker.
What are the 5 lab safety rules?
General Laboratory Safety Rules
- Know locations of laboratory safety showers, eyewashstations, and fire extinguishers.
- Know emergency exit routes.
- Avoid skin and eye contact with all chemicals.
- Minimize all chemical exposures.
- No horseplay will be tolerated.
- Assume that all chemicals of unknown toxicity are highly toxic.
What are the 4 general safety rules?
Seven Basic General Industry Safety Rules
- Keep work areas clean.
- Use the proper tool for the job.
- Always wear the proper PPE for the work task.
- Never work on live equipment.
- Make sure chemicals are properly labeled and stored.
- Communicate hazards to other personnel.
- Stop work when needed to address hazards.
What are the 10 lab safety rules?
Top 10 Lab Safety Rules
- Rule #1 – WALK.
- Rule #2 – PROPER LAB ATTIRE.
- Rule #3 – HANDLING CHEMICALS.
- Rule #4 – HANDLING EQUIPMENT.
- Rule #5 – BROKEN GLASS.
- Rule #6 – EYE WASH/SHOWER.
- Rule #7 – FIRE SAFETY.
- Rule #8 – EATING/DRINKING IN LAB.
What are the five lab safety rules?
What are laboratory safety rules?
Basic Safety Rules
- Know locations of laboratory safety showers, eyewashstations, and fire extinguishers.
- Know emergency exit routes.
- Avoid skin and eye contact with all chemicals.
- Minimize all chemical exposures.
- No horseplay will be tolerated.
- Assume that all chemicals of unknown toxicity are highly toxic.
Who are the laboratory personnel?
Those health care professionals, technicians, and assistants staffing a research or health care facility where specimens are grown, tested, or evaluated and the results of such measures are recorded.
What are three requirements of the laboratory safety standard?
The CHP must include provisions for worker training, chemical exposure monitoring where appropriate, medical consultation when exposure occurs, criteria for the use of personal protective equipment (PPE) and engineering controls, special precautions for particularly hazardous substances, and a requirement for a …
What is the safety rule concerning working alone in the laboratory?
Rule #1: If at all possible, avoid working alone in a laboratory. If solo work is unavoidable, work during prime or peak hours or make sure someone is working nearby.
How does an in session hands on lab work?
In-session Hands-on Lab. Attendees practice what they learn while they are attending a training session. Attendees gain experience by connecting to remote computers on which training software has been installed. Hosts reserve on-demand and in-session Hands-on Lab computers from the same pool of remote computers.
How to create a successful laboratory training program?
To do so, Pokelwaldt uses a variety of activities, from interactive polls to demonstrations, to keep trainees alert and to address different learning styles. Likewise, Balchunas reports that his programs have adopted a 50/50 split between time spent on classroom activities and hands-on experience operating laboratory and production equipment.
How to transfer knowledge back to the lab bench?
The training experts recommend a number of ways to promote knowledge transfer back to the lab bench. These include revising procedures to integrate elements of the new training, providing opportunities for employees to apply their new skills and showcase progress, and using a recertification process with a continuing-education component.
How to create a hands on lab on WebEx?
To access the Hands-on Lab page, sign in to your Webex Training website. On the navigation bar, select Host a Session > Hands-On Lab . First reserve computers in one of the labs when scheduling a training session, and then start Hands-on Lab during the training session.
In-session Hands-on Lab. Attendees practice what they learn while they are attending a training session. Attendees gain experience by connecting to remote computers on which training software has been installed. Hosts reserve on-demand and in-session Hands-on Lab computers from the same pool of remote computers.
How does sessionlab help you plan your workshop?
SessionLab makes it easy to design your session plan with colleagues whether they are standing next to you or are on the other side of the world. Share your plan, receive comments and notifications, and work together in real time. During delivery, adjust your plan as you go and let your co-facilitators stay up-to-date.
To do so, Pokelwaldt uses a variety of activities, from interactive polls to demonstrations, to keep trainees alert and to address different learning styles. Likewise, Balchunas reports that his programs have adopted a 50/50 split between time spent on classroom activities and hands-on experience operating laboratory and production equipment.
Why is training so important in the lab?
Training to keep staff updated on the skills needed to meet business demands, address changing industry trends, and use new technologies is a mission-critical component of any lab-based organization.